Tower brace on Skoda Octavia III A7 (2013 - present days)

The extension of the front struts for the Skoda Octavia 3 is not only a way to give a sporty look to your car, but also a real technical solution for finalizing your car. In other words, body kits.

This low-cost part of body kit provides the car with additional rigidity, since the body is not an integral part and consists of many parts. Body parts are fastened together using bolts and welding.

The higher the cornering speed, the more severe the body is deformed. In used cars, this phenomenon significantly worsens the condition of the body, it wears out, which is why the stiffness of individual parts in relation to each other is gradually deteriorating.

After installing the extension, the accuracy of high-speed passage in the bend increases, as well as the stability when driving.  The risk of body deformation during operation is reduced significantly. Therefore, the strut of the front struts is primarily safety, as well as a comfortable ride.

We`ve been developing the exterior body kits and accessories for more than 10 years. Thanks to the accumulated experience and our own engineering and technical base, there is a joint use of bonnet stops and front strut extensions. The surface of the product is protected by a wear-resistant coating that prevents the rust formation. Also, the coating does not come off or peel off with solvents. Be sure, choosing products from MV-TUNING you are guaranteed to get a high-quality and reliable product.

Installation time approximately 15 minutes.

We can also offer a set of bonnet stops for your car.