Front Grill, option №3 assembled original grill for Mazda 6 / Atenza GJ

Installation Instructions The base part is already pasted in the new standard base plate, but all the parts need to be coated. On coating, decorative bars need to be pasted in the seating sites and replace the standard grill to the new one with bumper removing. For installation you will need: 1. Degreaser 2. A piece of clean cloth 3. Hand brace with boring tool M6 4. Four-way screwdriver 5. Clip remover tool Installation process: 1. Degrease and apply primer on the pasting sites of decorative bars and MV-TUNING sticker. 2. Paste in the MV-Tuning nameplate sticker on the specially prepared site. 3. Paste in the decorative bars on the seating sites. Remove the primer traces by means of degreaser. 4. Remove/ demount the original radiator grill, take it apart according to standard works on the replacement of grill for the new one. 5. Transfer the needed (chrome bars) elements to the new radiator grill, install it on a vehicle and take pleasure on the result obtained.