|PLEASE READ FULL DESCRIPTION BEFORE ORDERING at MV-Tuning|
Spoiler AntiWing in ABT style for Audi Q5 (2008-2012)
All the Rear spoilers for AUDI presented in our catalogue developed and produced by “MV-Tuning” company.
Rear spoiler is an ingenious and stylish element of body kits designed specially for your AUDI.
It is a small cover for trunklid which elaborates your vehicle. Such spoiler successfully fits with your vehicle design.
The spoiler of "MV-TUNING" company:
• Produced of quality-made ABS-Plastic material;
• No need of additional refinement;
• Have ideal fitment and excellent surface quality which will have a positive effect on cost and quality of subsequent painting and adjustment;
• Easily fitted on trunk lid with double sided tape by means of special primer. Do-it-yourself adjustment is possible;
Rear spoiler is an additional design element which will form up energetical features to the vehicle rear part exterior.This body kits element will create an expressive style and more solid perception of exterior and give a new look to your car on the whole.
*The part quality doesn`t depend on material produced, it depends on relation of manufacturer to the process at all the stages of development and production.
Adjustment method: Doube-sided 3M adhesive tape, sealing component optionally.
Notice! For the mounting you need to have adhesive tape and primer which are not included to the kit. You may purchase them at extra charge.
Color: uncoated black ABS-plastic. Any color coating at extra charge is possible.
The cost of service "Preparation for the installation" includes the materials and performances for the part self-installation. 3M double-sided tape is glued onto the part using a primer. You only need to wipe the mounting location of the part on your car with a napkin soaked with the primer (which goes in the kit with this service) . Then you apply the part to the mounting site and pull out the red "liner" from 3M tape.
*For your recommendation regarding coating:
Before coating the spoiler apply it on the car to make sure it fits perfectly. There have been incidents at body shops damaging the plastic part with wrong type of paint and high temperature drying. The drying temperature must not exceed 60°С (140F). Our items require only conventional automotive painting technique: sanding, priming, painting and clear coating.
Mass-produced parts may have small surface scratches that are easily removed during pretreatment process.
This product is designed and carefully made by MV-Tuning. We have been manufacturing Body Kits for over 14 years. We are well known in Eastern Europe, and now expand to international market.
We are manufacturers. Buying from us, you do not overpay to resellers and relieve yourself of the risk of buying low-quality goods!
You save time and money! You can get decent advice on any product that we produce, information on the parts pretreatment and coating, and delivery all over the world.