Lip spoiler VW Jetta VI (2010, 2011, 2012, 2013,2014)
Completeness: linden spoiler - 1pc.
Mounting method: double-sided tape using a primer.
Attention, for installation you will need tape and primer, which are not included in the kit. You can purchase them separately.
Color: black ABS - plasticMaterial: ABS - plastic
Attention, information on the service of painting parts.
In most cases, we paint our parts at our authorized dealers. Parts are painted according to the paint code. According to the paint code, it merges, so to speak, the “base color”. In most cases of painting our parts, tinting by the hatch is not required, the parts coincide in 95% of orders, sometimes there are slight differences in shades with the car. But there is also a small percentage left where the base color is very different from the shade of the car. If you have doubts about this painting according to the paint code, then I ask you to consult with our managers or do tinting according to the car door.
Lip spoiler for
Volkswagen Jetta VI developed and manufactured by
"MV-TUNING"
Lip spoiler is a small overlay on the trunk lid that complements your car, gives a complete appearance, such a spoiler fits well into the design of your car and is a visual continuation of the trunk lid.
Lip spoiler from the
MV-TUNING company: *
- made of high quality ABS plastic / fiberglass;
- does not require additional modifications;
- has a perfect fit and excellent surface quality, which will positively affect the cost and quality of subsequent painting and installation;
- easily attached to the trunk lid using a special adhesive tape with a primer, without requiring special skills. Self-installation is possible. Boot lid drilling and access holes are not required.
The lip spoiler is an additional design element that will give the rear of the vehicle a more energetic appearance. This tuning element will create an expressive style and a more coherent perception of the exterior and will transform your Volkswagen as a whole.
* The quality of the part does not depend on the material of manufacture, but on the manufacturer's attitude to the process at all stages of development and production.
Простая установка при помощи двухстороннего скотча с применением праймера.
1. Обезжирить место приклейки на спойлере и крышке багажника, и нанести праймер с помощью одноразовой салфетки.
2. Приклеить двухсторонний скотч к спойлеру.
3. Приложить деталь к автомобилю, выставить деталь ровно и установить метки для установки спойлера к авто.
4. Аккуратно отклеить часть защитного лайнера двухстороннего скотча.
5. Приложить спойлер по меткам, и вытянуть оставшийся лайнер, попутно прижимая деталь к крышке багажника.
6. Удалить следы праймера с помощью обезжиривателя.
Все лип спойлера, производства компании МВ-Тюнинг, устанавливаются по одному варианту.
Пример видеоустановки на нашем канале YouTube:
Посмотреть видео инструкция 
