Our products are carefully manufactured and shipped from Russia.
Way of fastening: Standard clips and a bilateral adhesive tape of 3M firm with use of a primer.
Attention, for installation you will need an adhesive tape and a primer, which is not included in the package, you can purchase it separately.
We mostly make painting of our parts at the official dealers. The painting process is accomplished according to a code of painting. The “base colour” is blended according to painting code. In most cases of our parts painting process the color matching on fuel cap is not needed. The parts match in 95% of orders, sometimes having slight differences in vehicle dashes. But also there is low percent when the base color differs distinctively from vehicle dash. If you have doubts in this case of colouring on painting code please consult our managers or make color matching on fuel cap of a vehicle.|
Before painting, try the item on the car to make sure it’s a prefect fit. There have been incidents of body shops ruining the part with wrong type of paint and high temperature drying. The drying temperature should not exceed 60 degrees Celsius (140F).
Mass-produced parts may have small surface scratches that are easily removed during prep work.
Our items require only conventional automotive painting technique: sanding, priming, paint and clear coat.