For your recomendation regarding coating:|
Before coating the spoiler apply it on the car to make sure it fits perfectly. There have been incidents at body shops damaging the plastic part with wrong type of paint and high temperature drying. The drying temperature must not exceed 60°С (140F).
Our items require only conventional automotive painting technique: sanding, priming, painting and clear coating.
Mass-produced parts may have small surface scratches that are easily removed during pretreatment process.
We mostly make coating of our parts at the official dealers. The coating process is accomplished according to a code of painting. The “base colour” is blended according to coating code. In most cases of our parts coating process the color matching on fuel cap is not needed. The parts match in 95% of orders, sometimes having slight differences in vehicle dashes. But also there is low percent when the base color differs distinctively from vehicle dash. If you have doubts in this case of colouring on coating code please consult our managers or make color matching on fuel cap of a vehicle.