PLEASE READ FULL DESCRIPTION BEFORE ORDERING at MV-Tuning
Notice! For installation, you need tape and primer, which are not included to the package. You may purchase them additionally.
Spoiler is an ingenious and stylish element of body kits designed specially for your Skoda.
Color: Unpainted black ABS - plastic, can be coated in any color for an extra charge.
Spoiler for Skoda Kodiaq 2016-2023
developed and produced by “MV-Tuning” company.
|
Spoiler is a cover of a trunklid which elaborates your Skoda. Such spoiler successfully fits with your vehicle design and is considered to be visual extension of trunklid.
|
Spoiler of "MV-TUNING" company:
• Produced of quality-made ABS-Plastic material;
• No need of additional refinement;
• Have ideal fitment and excellent surface quality which will have a positive effect on cost and quality of subsequent coating and adjustment;
• Easily fitted on trunklid with double sided tape by means of special primer. Do-it-yourself adjustment is possible;
• No need of trunklid and technical hole drilling
|
Spoiler is an additional design element which will form up energetical features to the vehicle rear part exterior.This body kits element will create an expressive style and more solid perception of exterior and give a new look to your car on the whole.
Coating
We mostly make coatting of our parts at the official dealers. The coating process is accomplished according to a code of painting. The “base colour” is blended according to coating code. In most cases of our parts coating process the color matching on fuel cap is not needed. The parts match in 95% of orders, sometimes having slight differences in vehicle dashes. But also there is low percent when the base color differs distinctively from vehicle dash. If you have doubts in this case of colouring on coating code please consult our managers or make color matching on fuel cap of a vehicle.
*For your recomendation regarding coating:
Before coating the spoiler apply it on the car to make sure it fits perfectly. There have been incidents at body shops damaging the plastic part with wrong type of paint and high temperature drying. The drying temperature must not exceed 60°С (140F).
Our items require only conventional automotive painting technique: sanding, priming, painting and clear coating.
Mass-produced parts may have small surface scratches that are easily removed during pretreatment process.
|
|
|
*The part quality doesn`t depend on material produced, it depends on relation of manufacturer to the process at all the stages of development and production.
|
|