The spacer (stretching) of the front struts for the Kia Rio 3 is not only a way to give a sporty look to your car, but also a real technical solution to improve your car. Simply put - tuning. This inexpensive tuning part provides the car with additional rigidity, since the body is not a single piece and consists of many parts. Body parts are bolted and welded together. The faster the cornering speed, the more the body deforms. In used cars, this phenomenon significantly worsens the condition of the body, it wears out, due to which the rigidity of individual parts in relation to each other gradually deteriorates.
After installing the spacer, the accuracy of the high-speed cornering is increased, as well as the stability when driving. The risk of body deformation during operation is significantly reduced. Therefore, the strut of the front struts is primarily about safety, as well as a comfortable ride. We have been developing tuning and accessories for over 10 years. Thanks to the accumulated experience and our own engineering and technical base, there is a joint use of the hood stops and the front pillars. The surface of the product is protected by a wear-resistant coating that prevents the formation of rust. Also, the coating does not chip or peel off with solvents. Be sure, choosing products from "MV-TUNING" you are guaranteed to get a high-quality and reliable product.